AMACO Dipping & Layering (DL) Glaze is a ready-to-mix dry powder glaze (Cone 5–6) designed for production lines and ceramic studios. One bag of dry powder mixed with 1 gallon of distilled water yields up to 1.25 gallons, or 4.73 liters, of dipping-ready glaze. It reduces glazing time from 3–5 minutes to just 1–3 seconds per piece, saving time while ensuring consistent quality for your work.
Why should studios and production lines choose AMACO Dipping & Layering Glazes ?
Because the common challenge for ceramic studio owners, pottery schools, or mass production lines is, "How to achieve beautiful, consistent work while minimizing time and labor costs?"
AMACO Dipping & Layering (DL) Glazes were specifically created to solve this. Let's look at the comparison table between brush glazing and dipping to see why switching to AMACO DL powder glaze is perfect for your ceramic business.
|
|
Brush Glazing |
Dipping with AMACO Dipping & Layering |
|
Glazing time/piece |
3–5 minutes (requires 3–4 coats) |
1–3 seconds (dipped in one go) |
|
Glaze consistency |
Depends on the user's hand pressure and skill |
Smooth and consistent on every piece |
|
Yield/Quantity |
16 oz per jar |
1 bag makes 1.25 gallons |
|
Storage |
Easily dries out or clumps if stored for too long |
No Hard-Pan formula |
4 Reasons why AMACO DL is worth investing in for your pottery business
1. Excellent Value
From 1 bag, when mixed with 1 gallon of distilled water, you get 4.73 liters of usable glaze. Compared to buying individual jars, this is incredibly cost-effective. Plus, it provides enough volume for convenient dipping of plates, bowls, or tall mugs in a dipping tank, significantly reducing the wholesale ceramic glaze cost per piece.
2. Reduce labor costs and increase production capacity
The traditional brush application process is not only time-consuming but also prone to human error. This dipping technique, however, makes the job easier, allows for instant coating, increases daily production by dozens of times, helps reduce labor budget, and speeds up firing cycles.
3. Special formula guaranteed not to harden or settle
A major problem with standard powder glazes is that when mixed with water, the minerals settle and form hard clumps at the bottom of the bucket, wasting material. However, AMACO DL contains special suspending agents that make it easy to mix and reuse, reducing material waste in production.
4. Batch Code Tracker system for 100% QC control
Every bag of AMACO DL comes with a label and a Batch Code Tracker, allowing studios to record, verify, and maintain the Specific Gravity precisely for every production cycle, ensuring consistent results across all pieces.
AMACO Dipping & Layering helps reduce material costs, drastically cuts down on glazing time and labor, solves the issue of hard settling, and ensures precise QC for every production batch. Make the switch to AMACO DL and we guarantee it's well worth it.
Order authentic AMACO Dipping & Layering direct from the USA today.
- Online: www.potteryclaythailand.com
- For more information / order via chat: Contact the Pottery Clay team via Line @potteryclay